Putting plastic windows is only half the battle. So that they retain their original appearance and serve you for many years, they need proper care. Many people have a question how to wash plastic windows at home.
Detergents
If we talk about means for the care of plastic windows, then there are more and more of them every year. The industry produces ever newer and better products.
For cleaning may come in handy:
- “Mr. muscle” - the product is intended for washing glasses, it will allow you to get a transparent window without streaks;
- for cleansing stains, "Formula 409" is suitable;
- "Sanita" will help to delicately clean pollution;
- "Frosch" will relieve traces of installation work;
- "White Cat" - a rag that is designed to wash glass and plastic surfaces;
- "Domestos" - a gel that helps restore the whiteness of a plastic frame;
- "Mr. Proper" - perfectly copes with fingerprints, grease, soot;
- Pemolux is recommended for cleaning old dirt and stains;
- Comet gel is used to clean kitchen windows - it cleans greasy dirt well;
- washing powder, laundry soap or dish detergent can be used to wash fresh stains and small areas.
In addition to the use of household chemicals, you can resort to folk remedies, which are no less effective. Consider how you can wash plastic windows at home:
- Soap solution. Take any powder, laundry soap and dissolve in water. The resulting composition washes the windows.
- Dentifrice. It is mixed with chalk to a homogeneous consistency of sour cream, applied to the contamination and allowed to dry, after which it is washed with a dry cloth.
- A solution of vinegar or citric acid in combination with soda gives an excellent effect. Soda is applied to the surface, and intensively rubbed with a sponge with acid.
Washing technique
In order for plastic to remain aesthetically attractive for a long time, you need to know how to wash plastic windows at home and follow some rules for caring for them. The main point is the right choice of inventory. Do not use abrasive products that can scratch the plastic surface or scratch the glass.. It is worth using soft rags, sponges, paper towels and napkins.
Also, remember some rules:
- wash the windows on a cloudy day so that the glass does not dry so quickly, and you manage to wipe the surface before rainbow stains appear on it;
- first clean the frame, then only the glass;
- apply detergent evenly and in one direction, circular movements create stains;
- for glasses it is better to take special alcohol solutions of detergents.
For a good quality of cleaning, it is worth observing the correct sequence of actions. If the window was recently installed, you need to peel off all the film that protected the frame during transportation.
Using a normal soapy solution, wash my plastic from dust and dirt. If there are separate areas of severe pollution, they are treated with special means. Shallow scratches can be removed with a polish. However, not all products can be used to clean plastic windows.
Important! Remember that you cannot use:
- abrasive powder products will leave scratches on the surface, creating an untidy appearance of the plastic structure;
- acid and solvent can change the color of the panel, so use them with caution.
Proper care of the plastic frame and glass
The durability of use is due to proper care. This is especially true in the winter season, so you need to know how to care for plastic windows in winter.
In order to prepare the window for winter, you will need tools and equipment. These include:
- rags and napkins;
- soft brush;
- hexagon;
- grease for sealant;
- machine oil.
Work sequence
First of all, it is necessary to wash the windows from dirt and dust accumulated during the spring-summer period. In this case, soft rags and napkins are used, as well as non-abrasive detergents. Severe contamination must not be removed using a knife and cleaning powder.. Before you start washing the windows, you should brush off the dust with a brush.
After that, you need to start adjusting the fittings. This can be done using the hexagon. In order to avoid the penetration of cold into the room in winter, you need to translate the clips on the wings in winter mode. Thus, the fit of the window frame will be stronger.
It is important to lubricate the fittings with oil. After applying it to the parts you need to open and close the sash several times, this will help the oil to spread. The specified procedure should be repeated throughout the winter, most importantly, do not do this in extreme cold.
The sealant also requires attention. Rubber products wear out over time and cease to fit snugly, this is reflected in the tightness of the window. You can wash the gum directly on the window or by removing it. The procedure must be carried out using a detergent, after which it is imperative to wipe it dry. The process ends with the application of silicone means for rubber seals.
If you see that the window is fogging up in winter or condensation is gathering, then you need to contact specialists. They will check the condition of the rubber seal and replace it if it has worn out. It is important to replace parts on time, this will help extend the life of the window.
Double-glazed window service
Provided that the plastic window is correctly installed, the double-glazed window will last about 40 years. When installing, make sure that the windows are in a special protective film that will protect them from scratches during transportation and installation. Such windows do not need painting or pasting for the winter, but it is still necessary to wash them at least twice a year. Do not do this at low temperatures, as the glass may burst from contact with water.
Glass can be washed with soapy water. Do not use abrasive powders or brushes that scratch the glass surface.
Window sill care
The window sill deserves special attention. This is especially true for those who like to decorate their apartment with indoor plants. Water from watering flowers, falling on the windowsill, eventually forms yellow circles. These spots are very difficult to remove, and sometimes simply impossible, so you should use a special self-adhesive film on the windowsill, which can be white or a different color, as well as trays for indoor plants.
The texture of the windowsill may vary from manufacturer to manufacturer. They are smooth, porous or rough. When selling, a consultant usually talks about what kind of material is used for the windowsill and how to wash the dirt. However, some features should be taken into account, for example, a rough window sill can be cleaned using a stiff brush, but in no case should you use a scraper or knife.
Slope Care
Slopes also need care, but the means for this directly depend on the materials from which they are made. If they are made of plastic, then they will not require special care. They are easy to clean and clean from dust and dirt. A feature is the need to replace the sealant, which, several years after installation, is completely removed and replaced with a new one..
If the slope is made of drywall, then it is covered with paint that can be washed and, if necessary, updated. When using cork or bamboo, it is sufficient to systematically wipe them with a damp cloth from dust.
Plaster slopes should not be washed, as they are unstable to moisture, they can be wiped with a damp or dry cloth. At the joints, you need to use acrylic sealant, and the surface is timely painted.
Performing simple recommendations for the care of plastic windows, you can use them for a long period of time.