What is the meaning of error F11, which is lit on the display of the Indesit washing machine? What should I do if the “Extra rinse” - “Spin” - “Revolutions” lamps flash, the “Delay” - “Quick wash” - “Extra rinse” indicators are highlighted?
To solve the problem, you need to decrypt the fault code.
Error Code Decryption
If the Indesit washing machine shows the error F 11 on the display, this means that the drain pump is not working. Perhaps there is no voltage, or it burned out.
How the problem manifests itself:
- The machine does not drain water.
- The laundry does not spin.
- The wash only stopped.
Causes and troubleshooting
If a system failure occurs, reset the error by turning off and restarting the machine.
After the actions taken, still shows the error F 11? We offer options on how to fix the problem.
Checking pipes and drain filter
The most common problem is blockage. Small debris, hair, clothing items may get into the filter.
- Disconnect the Indesit washing machine from the mains.
- Open the hatch at the bottom of the housing and drain the water.
- Check and clean the pump, filter and drain pipe.
Failed to remove error F11 SMA Indesit? Check on further.
Pump inspection
If the drain also does not work, the cause may be a pump malfunction.The wiring may be damaged and electricity will not be supplied to the pump.
- Remove the back of the washer.
- Inspect wires, contacts, check connections.
- If there is no visual damage, check for an open with a multimeter.
Impeller failure
When draining water in an Indesit washing machine, is there a rumble? Check the impeller at the time of blockage; a foreign object may enter. How to fix the situation:
- Remove the drain filter.
- Remove the snail, clean.
When to replace the pump and its components:
- The machine stopped work before envisaged by the program.
- The work is in standard mode, but the water does not drain.
- Drain occurs with extraneous sounds.
Pump problem
A pump malfunction can cause an F11 error in the Indesit washing machine. If the previous steps did not help, do a check:
- Unplug the washer and turn off the water.
- Remove the bottom panel, unscrew the pump.
- With a multimeter, check the resistance of the winding, it should be no more than 220 Ohms. If more - it is better to change the pump.
- Remove the hose clamps, move the clamps.
- Install hoses on a new part, put them back in place.
Now you know what to do when the Indesit machine generates an error F 11. After the repair, turn on the control wash to check the operability of new parts.