The automatic machine needs regular maintenance, which is important for efficient and trouble-free operation. To prevent mold or mildew from appearing in the washer, there are no unpleasant odors, it is necessary to constantly clean all parts. In this article, you will learn how to sanitize a washing machine.
What is the disinfection of the washing machine
The machine is constantly in contact with various detergents, so a large layer of scale forms on the heating element. This is fraught with the appearance of an unpleasant odor, in addition, a fungus may appear. Disinfecting a washing machine is a great way to prevent infection, eliminate the germs and bacteria that most often live in the powder receptacle, rubber seal, filter and drum. If you neglect to clean the machine, germs penetrate the laundry loaded in the drum. This leads to the fact that irritation appears on the skin even from washed laundry. Consider some recommendations on how to sanitize a washing machine:
- Wash and remove dirt regularly from the outside of the AGR.
- Flush the filter.
- Disinfect the washing machine using special tools.
- Wipe the exterior with a dry cloth after each wash.
- Remove mold and unpleasant odors immediately after they have been detected.
Important! Having listened to the recommendations, you will notice that the washer will work properly and efficiently. This ensures a longer service life of several years.
How to use cleaners
It is much easier to take care of the machine outside. To properly remove impurities, follow these instructions:
- Add a few drops of dish detergent to the water. Dampen a fluffy, soft cloth in the solution.
- Wipe the body of the machine from all accessible sides. Also carefully wipe the hatch door.
- With a dry cloth, walk again through wet areas.
Recommendation! Do not use bleach, dry powders and abrasive products when caring for the machine! This can cause damage and damage the appearance of the equipment.
Are you curious how to disinfect a washing machine? Thoroughly rinse the powder receptacle, as it is where mold often forms and bacteria appear. What do we have to do:
- Take out the container. Light pollution will remove soda ash. Also, some housewives use Domestos, previously diluted with water. Soak a very dirty tray for several hours in warm water with an antibacterial agent. When the dirt gets wet, wipe the tray with a toothbrush.
- Rinse the drain filter regularly to prevent unpleasant odors. Do this at least once a month. A good tool for washing the washing machine is the same "Domestos".
Citric acid for washing machine
Want to know how else to sanitize a washer? The answer is simple - citric acid. This method is used by many owners of cars. But there are opponents of this method, claiming that the "lemon" can damage plastic and rubber parts. In fact, not everything is so scary, you just do not need to clean it too often. Citric acid helps to get rid of scale and a large layer of mold deposited on the heating element. So, how to properly sanitize SM:
- Pour 200 g of acid into the powder receptacle.
- Turn on the machine “idle” for the longest mode with high temperature.
- Watch what happens: large pieces of scale can get into the drain filter and clog it. If you hear a knock inside the drum, stop the washer and remove them.
- Turn on the machine to continue the program.
- When finished, open the door and wipe the rubber seal with a damp cloth.
Vinegar disinfection
They, like citric acid, can kill germs, get rid of scale and mold. How to use:
- Pour 2 cups of vinegar into the drum of the machine.
- Turn on continuous high temperature.
- The solution will work in a couple of minutes.
- Stop the mode, and let the machine stand for an hour. This will be quite enough to affect scale, bacteria and unpleasant odors.
- Launch the washer by turning on the shortest mode.
- When the program ends, wipe the inside of the door and the rubber seals.
Important! Vinegar leaves a pungent odor.Use air conditioning to weather it. Pour it into the drum and turn on the long rinse.
This disinfection of the washing machine at home will benefit your appliance and extend its service life.
High-quality disinfection of the machine
On the internal cleaning of the machine does not need to spend a lot of time, moreover, it is irregular. Only a few sectors need to be cleaned. We will tell you how to wash the washing machine. To clean the internal parts during operation, it is necessary to add an antibacterial agent for washing machines - bleach.
- Mix 150 ml of bleach and 250 ml of liquid powder.
- Choose a washing mode with a temperature mode of 60 degrees.
- After the end of the program, wipe the machine from the inside with a dry cloth.
Your machine will always be clean, and it will not be threatened by germs and fungi, leading to the formation of mold. If you are thinking about how you can disinfect the washing machine during the washing process, you should know that it is possible to use not only chemicals. Many microorganisms die at a temperature of 60 degrees and above. Therefore, select a program with such a temperature regime, and let the machine work for 15-20 minutes. The use of the steam function is suitable, if provided for in the model of the machine.
A brief summary: how to properly disinfect a machine
For complete disinfection of the washing machine, it is necessary to carry out disinfection both inside and outside. If you regularly take care of a washing machine, it will not be afraid of lime deposits, unpleasant odors, germs and fungi. It will last a long time, while at the same time it will efficiently and effectively eliminate pollution from things.